Aquarius SUS Quick Faucet Tap

Aquarius SUS Quick Faucet Tap

The Aquarius SUS Quick Faucet Tap is a spare tap accessory designed for compatible Aquarius water systems and selected kitchen filtration setups. It is suitable for customers replacing, maintaining or setting up a compatible filtered water tap connection.

Designed for Filtered Water Systems

This faucet tap may be used with compatible Aquarius systems where a dedicated filtered water outlet is required. It is useful for customers who want a simple tap option for selected under sink, bench top or hydration system installations.

Key Features

• Aquarius SUS quick faucet tap
• Designed for compatible filtered water systems
• Useful for selected kitchen water filter installations
• Suitable for replacement, maintenance or setup work where compatible
• Available from Alkaline World with filters, taps and spare parts

Before Ordering

Please check your existing system model, tap requirements, tubing size and installation layout before ordering. This product is a tap accessory only and does not include filter cartridges, tubing or a full water filtration system unless stated otherwise.

Installation Note

Professional installation may be required depending on your plumbing layout and local requirements. Always follow your water filter system instructions and use suitable fittings for your specific setup.

Aquarius Water Faucet Tap — Model YLW-18

Technical requirements

1. The tap body is made from 304 stainless steel.
2. The valve core is made from PA (non-toxic nylon).
3. The outlet spout is made from SUS304 stainless steel with a brushed finish.
4. The product surface must undergo a 48-hour neutral salt-spray test.
5. The lead content of materials in direct contact with water must be below 0.1%.
6. Apply environmentally friendly silicone grease to all flexible seals. The handle must operate smoothly.
7. The brushed surface must be sound and fine-textured, with uniform colour and consistent brushing direction. No scratches, dents or other visible defects are permitted.
8. No machining oil may remain inside the product, and no cutting debris may remain inside the waterways.
9. Test the product underwater using air pressures of 0.8 MPa and 0.2 MPa. No bubbles may appear.
10. At a dynamic water pressure of 0.3 MPa, the flow rate must exceed 3.5 litres per minute.
11. Connect the tap to a water-hammer testing machine set to 1.04 MPa. Complete 100,000 cycles without deformation, damage or leakage.
12. Apply a torque of 5 kgf·cm to the handle in both clockwise and anticlockwise directions. No damage or leakage is permitted.
13. Test at a water temperature of 4–21°C and a water pressure of 230 psi for 15 minutes, with no leakage.
14. Package the product in a non-woven fabric bag.
15. Inner box dimensions: 340 × 140 × 32.

Dimensions and connection labels

Dimensions in millimetres.